Rear view of unimux-dvi-8, Nti unimux series usb kvm switch 6, Figure 5- connect each cpu – Network Technologies DVI-x User Manual

Page 9: Figure 6- connect the ac adapter, 5 vdc

Advertising

NTI UNIMUX SERIES USB KVM SWITCH

5. Connect each CPU to the USB switch using a DVI-HDMI-MM-x (x=3, 6, 10, or 15 foot) cable for each video connection
and a USB-AB-yM (y= .5, 1, 2, 3, or 5 meters) for each input device connection – REQUIRED (not supplied). (See Fig. 5
below.) Cables are available from NTI.

6. Group the input device and monitor interface cables from each CPU, making sure that cables from the first CPU are
connected to the UNIMUX at connectors CPU 1 and VIDEO 1. Cables from the second CPU should
connect to CPU 2 and VIDEO 2 connectors...etc.

Figure 5- Connect each CPU

7. Connect the AC adapter to the UNIMUX. (See Fig. 6 below.)

Figure 6- Connect the AC adapter

Rear View of UNIMUX-DVI-8

CPU 1

CPU 2

CPU 3

CPU 4

CPU 5

CPU 6

CPU 7

CPU 8

VIDEO 1

VIDEO 2

VIDEO 3

VIDEO 4

VIDEO 5

VIDEO 6

VIDEO 7

VIDEO 8

RS232

5VDC

USB Type B
Female

USB Type A Female

USB Type A Male

DVI Female

Video Connector

Rear View of Windows USB CPU

Video Port

Input Device Port

HDMI Type A

Video Connector

Mating Face of

DVI Male