Nortec MH Series - Manual (Page 19)

10-10
Page 15
2008-12-03
1.1.6 Setting the Cleaning Mode (MHTC Reflow only)
NOTE: The cleaning mode may only be set with the MHTC Reflow. With the
cleaning mode you determine whether the humidification boxes will be washed
simultaneously during a draining or operation dependent draining /cleaning
cycle. This option does not appear for other models.
Select “Clean Mode” in the settings menu, then
press the <Set> key. In the upcoming
modification dialogue select the desired
cleaning/draining mode.
Factory setting: Drain
Options:
Drain (draining only)
Wash (Draining w/box cleaning)
NOTE: During operation, the washing process of the humidification boxes can
lead to a temporary humidity increase.