Nortec MH Series User Manual
Page 6
10-00
Page 2
2008-12-03
1. INTRODUCTION
1.1 NOTES ON THE OPERATING INSTRUCTIONS
Limitation
These operating instructions are an addendum to the installation and operating
instructions for the Nortec MH and describe the operating of the MH control unit, which
is used with the models Nortec MHTC Flow, MHB Reflow, MHTC Reflow. These
operating instructions are meant for well trained personnel being sufficiently qualified.
Safekeeping
Please safeguard these operating instructions in a safe place, where they can be
immediately accessed. If the equipment changes hands, the documentation must be
passed on to the new operator.
If the documentation gets lost, please contact your local Nortec representative.
Copyright protection
The present operating instructions are protected under the Copyright Act. Passing-on
and reproduction of the manual (or part thereof) as well as exploitation and
communication of the contents are prohibited without written permission by the
manufacturer. Violation of copyright terms is subject to legal prosecution and arises
liability for indemnification. The manufacturer reserves the right to fully exploit
commercial patent rights.
1.2 SAFETY
Every person operating the MH control unit must have read and understood the
operating instructions of the MH control unit as well as the installation and operating
instructions of the Nortec MH (specially the safety instructions).
Knowing and understanding the contents of the operating instructions of the MH
control unit and the installation and operating instructions of the Nortec MH is a basic
requirement for protecting the personnel against any kind of danger, to prevent faulty
operation, and to operate the unit safely and correctly.