NISSAN 40053 - Manual (Page 14)

14 ‘04-’09 Nissan Titan - Kit 40053
d. Position kit brackets, rear bumper on bumper
brackets ensure that cutting allows brackets to fit
flush together.
e. Remove four squeeze clips and center bumper
cover from rear bumper.
f. Install kit brackets, rear bumper on bumper
brackets with six kit bolts (7/16” x 1-1/2”), twelve
kit washers (7/16” USS), and six kit nuts (7/16”
nylock). Do not tighten.
g. Install rear bumper and kit bracket, rear
bumper on frame with six bolts. Do not tighten.
Squeeze Clip
Center
Bumper
Cover
Rear Bumper
Kit Bolts (7/16” x 1-1/2”),
Kit Washers (7/16” USS),
& Kit Nuts (7/16” Nylock)
Bumper
Bracket
Kit Brackets
Rear Bumper
Bolt
Frame
h. Install kit bracket, hitch support on hitch and
rear bumper with four kit bolts (7/16” x 1-1/2”),
eight kit washers (7/16” SAE), and four kit nuts
(7/16” nylock).
i. Check measurements taken earlier and tighten
all bumper and bumper bracket bolts.
j. Install center bumper cover on rear bumper with
four squeeze clips.
2. Rear bumper wiring
a. Install wiring harness on bumper.
Kit Bolts (7/16” x 1-1/2”),
Washers (7/16” SAE), &
Kit Nuts (7/16” Nylock)
Kit Bracket,
Hitch
Support
Hitch
Rear Bumper
Wiring Har-
ness & Clip
Bumper