NISSAN 40053 - Manual (Page 28)

28 ‘04-’09 Nissan Titan - Kit 40053
l. Install skid plate onto vehicle with four screws.
m. Mark and drill two 1/4” holes into skid plate.
Install front bumper fascia straps onto skid plate
with two kit push clips.
Bed Spacers (Crush Blocks)
1. Remove four bed bushings from frame.
Bolts
Frame
Skid Plate
Front
Bumper
Fascia
Push Clips
Skid plate
Frame
Bed
Bed Bushing
2. Install four bed bushings on four kit bed spacers
(crush blocks). Position four kit bed spacers (crush
blocks) on frame rail as shown.
3. Tack-weld four kit bed spacers (crush blocks) to
frame.
After Completing Installation
Inside Cab
1. Airbag fuse
a. Install airbag fuse.
b. Install fuse cover.
c. Remove strap from steering wheel.
Engine Compartment
1. Battery cables
Kit Bed
Spacer
(Crush
Block)
Weld
Frame
Bed Bushing
Fuse Cover
Airbag Fuse