National Instruments NI PXIe-8130 - Manual (Page 54)

Chapter 3 I/O Information
© National Instruments Corporation 3-13 NI PXIe-8130 User Manual
8 NDAC# Not Data Accepted
9 IFC# Interface Clear
10 SRQ# Service Request
11 ATN# Attention
12 SHIELD Chassis ground
13 DIO5# Data Bit 5
14 DIO6# Data Bit 6
15 DIO7# Data Bit 7
16 DIO8# Data Bit 8
17 REN# Remote Enable
18–25 GND Logic Ground
Note: The pound symbol (#) indicates an active low signal.
Table 3-9. GPIB Connector Signals (Continued)
Pin Signal Name Signal Description