Adsl2+ router, Modem set-up, Mac user guide – NetComm NB6PLUS4W User Manual
Page 12
Advertising
ADSL2+ Router
Mac User Guide
– NB6Plus4W
To configure your NB6Plus4W ADSL Modem, follow the steps below:
1.
Open a web browser such as Safari or Internet Explorer.
2.
In the Location Bar, type 192.168.1.1 and press Enter.
3.
Enter the username and password. The default username is “admin”. The default
password is “admin”. Click on OK.
4.
The NB6Plus4W configuration page will be displayed. Enter the username and
password that your ISP has provided and click on “connect”.
5.
After a few seconds, router will restart and lights will get stable. Once connected, PPP
light on front panel of the modem will come on. You will see this screen on your Mac.
Modem
set-up
Advertising