NetComm NB6PLUS4W - Manual (Page 6)

ADSL2+ Router
Mac User Guide
6 – NB6Plus4W
10. Close the Network window by clicking the red close button (System 10.3) or select “Quit
System Preferences” under the “System Preferences” menu (System 10.2 or earlier).
Step 1 – Install the Hardware
To connect your modem using Airport, follow these step-by-step instructions:
1. Install your Airport or Airport Extreme card.
If your Airport is not already installed, follow the instructions in the User Guide that came
with your Mac to install an Airport or Airport Extreme card.
2. Connect the ADSL cable.
Connect one end of the telephone cable provided to the port labeled ADSL on the rear
panel of your NB9W Modem. Connect the other end to your wall phone jack.
3. Attach the power connector.
Connect the AC power adapter to the Power connector on the back of the NB6Plus4W and
plug in the adapter into a wall outlet or power strip.
4. Switch on the power. Your NB6Plus4W will start up. Turn on your Mac.
Airport
Installation