NISSAN 2009 Altima Coupe - Manual (Page 102)

5. The selected destination is displayed at the
center of the map. Touch the “Start” key af-
ter confirming the location of the displayed
destination.
The system sets the destination to the se-
lected location and starts calculating a
route.
INFO:
If the route is already set, the selected location
becomes a destination.
INFO:
You can also set the destination by touching the
“MENU” key in the current location map screen
and then touching the “Nearby Places” key.
Setting by voice command
1. Press the button located on the
steering wheel switch.
2. After the tone sounds, say a command.
● To display the 5 nearest Points of Interest and
select the destination from them say:
“Show nearby places” after the system
prompts, provide a category name. Then se-
lect your destination from the list provided.
● To display the nearby category list and select
the destination from it say:
“Destination nearby places” after the system
prompts, provide a category name. Then say
the number of your preferred destination.
The following operations are available after you
set a destination.
LNV0238 LNV0240
OPERATIONS AFTER SETTING A
DESTINATION
Setting a destination 4-37
੬
REVIEW COPY— 2009 Altima (alt)
Navigation System OM—USA_English (nna)
05/22/08—debbie
੭