Setting a facility as the destination -21, Setting a point of interest -21 – NISSAN 2009 Altima Coupe User Manual

Page 86

Advertising
background image

When you are setting the destination to a facility,
the following methods are available.

● Setting a Point of Interest

This allows you to find a facility by type, and
then have the system calculate a route to
that destination. Specify the region and city
of the destination to find it more quickly.

● Setting a Freeway Entrance/Exit

This allows you to set the destination to an
entrance or exit of a freeway, and then have
the system calculate a route.

● Setting by Phone Number

If you know the telephone number of the
facility, use this to find the facility by enter-
ing the number, and then have the system
calculate a route.

● Setting a Nearby Place

This allows you to set the destination to a
facility located near the current vehicle loca-
tion or another location that you move to by
scrolling the map, and then have the system
calculate a route. If there is a particular Point
of Interest type that you intend to use
frequently, you can store it in the list of
nearby Points of Interest.

“CUSTOMIZING NEARBY PLACES”
(page 6-26)

SETTING A POINT OF INTEREST

1. Press the DEST button.

2. Touch the “Points of Interest” key.

LNV0203

SETTING A FACILITY AS THE DESTI-
NATION

Setting a destination

4-21

REVIEW COPY—

2009 Altima (alt)

Navigation System OM—USA_English (nna)
05/22/08—debbie

Advertising