NISSAN 2009 Altima Coupe - Manual (Page 84)

5. The selected destination is displayed at the
center of the map. Touch the “Start” key af-
ter confirming the location of the displayed
destination.
The system sets the destination to the se-
lected location and starts calculating a
route.
INFO:
Even after setting a destination, you can adjust
the location of the destination.
“OPERATIONS AFTER SETTING A
DESTINATION” (page 4-37)
Setting by voice command
1. Press the button on the steering
wheel switch.
2. After the tone sounds, say a command.
● To display a list of previous destinations say:
“Destination previous destinations”
SETTING THE PREVIOUS STARTING
POINT
1. Press the DEST button.
2. Touch the “Others” key.
3. Touch the “Previous Starting Point” key.
LNV0197 LNV0198 WNV0558
Setting a destination 4-19
੬
REVIEW COPY— 2009 Altima (alt)
Navigation System OM—USA_English (nna)
05/22/08—debbie
੭