Eizo COLOR EDGE CG245W - Manual (Page 36)

36
Chapter 5 Power Saving Function
Chapter 5 Power Saving Function
5-1. Setting the Power Saving [Power Save]
This function allows you to set the monitor into the power saving mode according to the PC status.
When the monitor enters the power saving mode, no image is displayed on the screen.
Attention
• Either switch off the main power supply or remove the power plug from the socket to completely stop the supply
of electricity to the monitor.
• Devices connected to the USB port (upstream and downstream) work when the monitor is in power saving
mode or when the power button of the monitor is Off. Therefore, power consumption of the monitor varies with
connected devices even in the power saving mode.
Power Save is compliant with the following standards for the respective signal inputs.
signal inputs Standard
Analog signal VESA DPMS
Digital signal DVI DVI DMPM
DisplayPort DisplayPort Standard V1.1a
Procedure
1. Choose <PowerManager> from the Adjustment menu, and press
.
2. Choose <Power Save> from the <PowerManager> menu, and press .
3. Select “On” or “Off” with or .
4. Press to exit the adjustment.
Power Saving System
The monitor enters the power saving mode in conjunction with the PC settings.
PC Monitor Power Indicator
Operating Operating Blue
Power saving STAND-BY
SUSPENDED
OFF
Power saving Orange