Eizo COLOR EDGE CG245W - Manual (Page 48)

48
Chapter 7 Reference
Connector Pin Assignment
• DVI-I connector
1 2 3 4 5 6 7 8
9
10 11 12 13 14 15 16
19 20 21 17 18 22 23 24
C1 C2
C3 C4
C5
Pin
No.
Signal Pin
No.
Signal Pin
No.
Signal
1 T.M.D.S. Data 2- 11 T.M.D.S. Data1/3 Shield 21 NC*
2 T.M.D.S. Data 2+ 12 NC* 22 T.M.D.S. Clock shield
3 T.M.D.S. Data2/4 Shield 13 NC* 23 T.M.D.S. Clock+
4 NC* 14 +5V Power 24 T.M.D.S. Clock-
5 NC* 15 Ground (return for +5V,
Hsync, and Vsync)
C1 Analog Red
6 DDC Clock (SCL) 16 Hot Plug Detect C2 Analog Green
7 DDC Data (SDA) 17 T.M.D.S. Data0- C3 Analog Blue
8 Analog Vertical Sync 18 T.M.D.S. Data0+ C4 Analog Horizontal Sync
9 T.M.D.S. Data1- 19 T.M.D.S. Data0/5 Shield C5 Analog Ground(analog
R,G,&B return)
10 T.M.D.S. Data1+ 20 NC*
(NC*: No Connection)
• DisplayPort connector
1 3 5 7 9 11 13 15 17 19
2 4 6 8 10 12 14 16 18 20
Pin No. Signal Pin No. Signal Pin No. Signal
1 ML Lane3- 8 Ground 15 AUX CH+
2 Ground 9 ML Lane1+ 16 Ground
3 ML Lane3+ 10 ML Lane0- 17 AUX CH-
4 ML Lane2- 11 Ground 18 Hot Plug Detect
5 Ground 12 ML Lane0+ 19 Return
6 ML Lane2+ 13 CONFIG1 20 DP PWR
7 ML Lane1- 14 CONFIG2
• USB port
Upstream
Series A connector Series B connector
Downstream
Contact No. Signal Remarks
1 VCC Cable power
2 - Data Serial data
3 + Data Serial data
4 Ground Cable ground