Regency U32-NG3 - Manual (Page 19)

19 U32-3 FPI Direct Vent Gas Insert
THE KENSINGTON
2-PANEL DOOR INSTALLATION
3) Hook the Left Side Screen Door to the Door Frame by placing the door
hinges (top & bottom) over the pins on the Door Frame. Repeat for
Right Side Screen Door.
Note: It will be easier to put the Screen Door in place by starting with
the bottom hinge.
2) Mount the 2-panel Door Frame to the flange on Sub-Frame, ensuring
to line up holes. Secure using the 6 screws provided.
Left Side Door Pin on Door Frame
Note: If you find that the Left or Right Side Screen Door is lower then
the other, use the spacer provided to help align the Doors.
The spacer is to be placed over the bottom pin before installing the
Screen Door.
Spacer
Sub-Frame
1) Install the Sub-Frame by hooking the top flange onto the top of the
Glass Door and swing the Sub-Frame towards the unit. Pull out the
hooks which already secure the Glass Door and place them thru the
holes in the bottom of the Sub-Frame to secure both the Glass Door
and Sub-Frame in place together.
Glass Door
Hook
Sub-Frame
INSTALLATION