Ricoh BY1000 - Manual (Page 222)

222
Monitoring and Configuring the Printer
Configure SMTP (Group 3)
Configure SMTP (Group 4)
Display Status
Reset Settings to Defaults
You can select whether or not to initialize the printer to its default settings.
Restart Print Server
You can select whether or not to restart the print server.
Exit
You can exit from specifying printer settings.
Display Status Information
Use the Display Status command to check the printer status and current settings.
Cover Open
The duplex unit cover is open.
The right front cover is open.
Text in E-mail You can enter a shared comment
Settings Description
SMTP You can select whether or not to use the SMTP protocol.
SMTP Server Name You can specify the name of the SMTP server.
SMTP Port Number You can specify the SMTP port.
Device E-mail Address You can specify the printer's e-mail address.
Administrator E-mail Address You can specify the administrator's e-mail address.
Text in E-mail You can enter a shared comment
Settings Description
SMTP You can select whether or not to use the SMTP protocol.
SMTP Server Name You can specify the name of the SMTP server.
SMTP Port Number You can specify the SMTP port.
Device E-mail Address You can specify the printer's e-mail address.
Administrator E-mail Address You can specify the administrator's e-mail address.
Text in E-mail You can enter a shared comment
Settings Description
prn1 You can check the printer status.
system You can check the printer's system configuration.
Settings Description