Ricoh Type 2500 - Manual (Page 17)

11
B
Lift up the paper guide release lever.
1. Paper guide release lever
C
Adjust the paper guides to the paper size, and then gently insert paper face
down into the bypass tray.
1. Extender
2. Paper guides
• Open out the extender to support paper sizes larger than A4 L, 8
1 /
2
×11 L.
• If the paper guides are not flush against the paper, skewing and misfeeds
might occur.
• Gently insert paper until it stops.
• Load only as much paper as can be held between the guides on the bypass
tray. Overloading the bypass tray can result in misfeeds and skewed imag-
es.
• Fan the paper to get air between the sheets to avoid a multi-sheet feed.
• When setting an OHP transparency, make sure that its front and back sides
are properly positioned.
ARB017S
AYM004S