Ricoh Type 2500 - Manual (Page 18)

12
D
Push down the paper guide release lever.
E
Set the paper size using the printer driver or the control panel.
Note
❒ Paper within the following dimensions can be set in the bypass tray:
• Vertical: 90 - 297 mm (3.55 - 11.69 in.)
• Horizontal: 148 - 600 mm (5.83 - 23.62 in.)
❒ Be sure to set the paper with the side you want to print facing down in the
bypass tray.
❒ The number of sheets that can be loaded in the bypass tray depends on the
paper type.
❒ When loading OHP transparencies or thick paper in the bypass tray, make
the paper setting using the control panel or printer driver.
Reference
For details about setting the paper size, see p.13 “Setting the Paper Size Us-
ing the Control Panel”.
For details about setting paper in the regular paper tray, see Copy Refer-
ence and General Settings Guide.
When loading custom size paper, see p.14 “Setting the Custom Size Paper
Using the Control Panel”.
Select paper type when printing onto OHP transparencies or thick paper
(over 105.1 g/m
2 ). For details, see p.16 “Setting Thick Paper or OHP Trans-
parencies Using the Control Panel”.
Select paper type when printing onto envelopes. For details, see p.17 “Set-
ting Envelope Using the Control Panel”.
When loading letterhead paper, pay attention to its orientation. See Copy
Reference and General Settings Guide.
AYM005S