Ricoh Type 2500 - Manual (Page 59)

Making Option Settings for the Printer
53
1
❖ When connected with the network
• DeskTopBinder Lite must be installed, or the Standard TCP/IP port must
be used.
• Under Windows 2000/XP, Windows Server 2003, or Windows Vista, [En-
able bidirectional support] must be selected, and [Enable printer pooling] must
not be selected on the [Ports] tab with the RPCS printer driver.
If the Standard TCP/IP port is not being used, one of the following conditions
must be met in addition to the two above:
• The SmartDeviceMonitor for Client port and the TCP/IP protocol must be
used.
• The standard TCP/IP port must be used without changing the default port
name (for Windows 2000 / XP, Windows Server 2003 and Windows Vista).
• Microsoft TCP/IP print IP address must be specified for use (for Windows
NT 4.0).
• When using IPP protocol with the PCL printer driver, the IPP port name
must include the IP address.
❖ When connected with USB
The machine must be connected to the computer's USB port using the USB in-
terface cable.
The computer must support bidirectional communication.
Note
❒ Install SmartDeviceMonitor for Client from the supplied CD-ROM.
If Bidirectional Communication Is Disabled
Set up option settings when bidirectional communications are disabled.
Important
❒ Under Windows 2000 / XP and Windows Server 2003, Manage Printers per-
mission is required to change the printer properties in the [Printers] folder.
Log on as an Administrators or Power Users group member.
❒ Under Windows NT 4.0, Full Control permission is required to change the
printer properties in the [Printers] (Windows 2000) or [Printers and Faxes] (Win-
dows XP / Windows Server 2003) folder. Log on as an Administrators or
Power Users group member.
A
On the [Start] menu, point to [Settings], and then click [Printers].
The [Printers] window appears.
When using Windows XP or Windows Server 2003, point to [Settings] on the
[Start]
menu, and then click [Printers and Faxes]. The [Printers and Faxes] win-
dow appears.
When using Windows Vista, click [Control Panel] on the [Start] menu, click
[Hardware and Sound]
, and then click [Printer]. The [Printers] window opens.