Effect settings, Adjusting the reverb settings – Roland HPD-15 User Manual

Page 39

Advertising
background image

39

Chapter 2 Modifying a Patch

Chapter 2

Effect Settings

You can add reverberation to the sound to create the
sensation of playing in a hall or on stage, apply distortion to
the sound, or add depth, spaciousness, and modulation.

* The effect will apply to all pads / D Beam / ribbons.

Adjusting the Reverb Settings

Reverb adds reverberation to the sound to simulate a
spacious ambience.

Parameter Category: REVERB

fig.2-12

Type: Refer to REVERB/DELAY Type (p. 95)

Selects the preset setting of reverb.

If you wish to make even more detailed settings, adjust the
algorithm and parameters below. When you change a value,
a “#” will appear beside the “Type.”

Algo: OFF, Room1–2, Stage, Plate, Hall1–2,

Delay, PanDly

Selects the type (algorithm) of reverb. If you select OFF no
reverb will be applied, and the following parameters will not
be displayed.

Room1

: Simulation of the reverberation in a room

Room2

: Brighter reverb than Room1

Stage

:

Simulation of on-stage reverberation

Plate

:

Simulation of a metal plate reverb

Hall1

:

Simulation of a larger space than Room

Hall2

:

Brighter reverb than Hall1

Delay

:

Standard delay (Echo)

PanDly

: Delay that pans (moves) the reflection between

left and right

Level: 0–127

Adjusts the volume of the reverberation (or delay sound).

Time: 0–127

If Algo is Room1–Hall2, this adjusts the duration of the
reverberation. If Algo is Delay or PanDly, this adjusts the
delay time.

HF Damp: 200Hz–8kHz, THRU

Adjusts the currently at which the high range of the
reverberation will be cut. As you lower the frequency, more
of the high range will be cut, producing a softer sound. If you
do not wish to cut the high range, set this to THRU.

Dly Feedback: 0–127

Adjusts the number of times that the delay sound will be
repeated.

* This will be displayed only if Algo is Delay or PanDly.

fig.2-13.e

If you change the “Type,” the algorithm of the reverb and the
values of the parameters will be changed to the setting of
each type.

U0101 REVERB/DLY
Type# Room1

Direct Sound

Reverb Sound

Time

Level

Dly Feedback

Level

Time

Algo: Room1–2, Stage, Plate, Hall1–2

Algo: Delay, PanDly

Delay Sound

Direct Sound

Advertising