Roland HPD-15 - Manual (Page 65)

65
Chapter 4
Chapter 4 Changing Patches in the Desired Sequence
This allow you to step through the patches of your choice
and in the order you want. The HPD-15 lets you create and
store 10 different groups of up to 32 steps each.
fig.4-01.e
Creating a Patch Chain
(Chain Edit)
1. Press [CHAIN].
[CHAIN] will light, and you will enter Chain Play mode.
fig.4-02
2. Press [EDIT].
[EDIT] will light, and you will enter Chain Edit mode.
fig.4-03
3. Press [GROUP -] or [GROUP +] to select the chain group
which you wish to edit.
fig.4-04
4. Turn [PATCH/VALUE] or use Pad Patch Select (p. 23) to
select the patch that will be selected first.
fig.4-05
5. Press [PATCH NUMBER ] to move to the next step.
fig.4-06
6. Turn [PATCH/VALUE] or use Pad Patch Select (p. 23) to
select the patch.
7. Repeat Steps 5–6 to continue editing.
8. Press [EDIT] or [EXIT].
[EDIT] will go dark, and you will return to Chain Play
mode.
fig.4-07
When you modify the setting of a patch chain, the new
setting is automatically saved as soon as you make the
change.If you need to return to the factory settings, refer to
“Restoring the Factory Settings” (p. 85).
Specifying the Last Step of the
Patch Chain
Specify one of the following as the last step in the patch
chain. If you have specified patched up to step 32, you can
specify it at step 33.
It is not possible to specify a patch at step 33.
END:
When you reach the last step, the progression of steps will
end.
fig.4-08.e
LOOP:
If you advance a step from the last step, you will return to
step 1.
fig.4-09.e
JUMP TO CH01–10:
If you advance a step from the last step, you will jump to step
1 of the specified chain group.
fig.4-10.e
Chain
Group 1 Patch
U0107
Patch
U0504
Patch
P0802
Patch
U0306
Chain
Group 2
Chain
Group 10
32 Steps
U01 CHAIN 01---
01 Conga
CHAIN EDIT 01-01
(EMPTY CHAIN)
CHAIN EDIT 05-01
(EMPTY CHAIN)
CHAIN EDIT 05-01
U0201 TalkingDrm
CHAIN EDIT 05-02
-----[LOOP]-----
U02 CHAIN 05-01
01 TalkingDrm
1 2 3 4 5 (6 = END)
Chain Step
1 2 3 4 5 (6 = LOOP)
Chain Step
1 2
1 2 3 4 5 (6 = JUMP TO CH10)
Chain Step
(Chain Group 10)