Omni mode, P. 170) to off, be sure to match, Midi ch (midi channel) – Roland VG-99 User Manual

Page 170: P. 170) to the external midi device’s, Midi, 170 chapter 9 parameter guide system

Advertising
background image

170

Chapter 9 Parameter Guide SYSTEM

MIDI

Parameter/
Range

Explanation

MIDI CH (MIDI Channel)

1–16ch

This sets the channel used for transmitting
and receiving MIDI messages.
When controlling another synthesizer
sound module using the GUITAR TO MIDI
function, also refer to

“GUITAR TO MIDI”

(p. 164).

OMNI MODE

OFF, ON

When MIDI OMNI MODE is set to ON,
messages are received on all MIDI channels,
regardless of the MIDI channel settings.

DEVICE ID

1–32

This sets the Device ID used for transmis-
sion and reception of Exclusive messages.

SYNC CLOCK

This setting determines the basis used for synchronizing the timing
for effect modulation rates and other time-based parameters.

INTERNAL

Operations are synchronized to the VG-99’s
internal Clock.

AUTO (USB)

Operations are synchronized to the MIDI
Clock received via USB. However, opera-
tions are automatically synchronized to the
VG-99’s internal Clock if the VG-99 is un-
able to receive the external Clock.

AUTO (MIDI)

Operations are synchronized to the MIDI
Clock received via MIDI. However,
operations are automatically synchronized
to the VG-99’s internal Clock if the VG-99 is
unable to receive the external Clock.

AUTO (RRC2)

Operations are synchronized to the MIDI
Clock received via the RRC2 connector.
However, operations are automatically syn-
chronized to the VG-99’s internal Clock if
the VG-99 is unable to receive the external
Clock.

MIDI
MIDI IN

This sets the routing of signals arriving at the MIDI IN connector.

OFF

Signals are not received at MIDI IN.

MAIN

Signals received at MIDI IN are transmitted
to the VG-99’s internal section.

Parameter/
Range

Explanation

MIDI OUT

This sets the routing of signals at the MIDI OUT connector.

OFF

Signals are not output from MIDI OUT.

MAIN

Signals from the VG-99 are output.

USB

MIDI signals received via USB are output.

MIDI

The MIDI signals received at MIDI IN are
output from MIDI OUT (thru).
When other signals also are set to be output
simultaneously from MIDI OUT, the signals
are mixed and then output together
(merge).

RRC2

The MIDI signals received at through RRC2
are output from MIDI OUT (thru).
When other signals also are set to be output
simultaneously from MIDI OUT, the signals
are mixed and then output together
(merge).

USB (MIDI)

This sets the routing of signals received via USB.

OFF

Signals are not received via USB.

MAIN

Signals received via USB are transmitted to
the VG-99’s internal section.

USB (MIDI)

This sets the routing of signals output from the USB connector.

OFF

Signals are not output from the USB connec-
tor.

MAIN

MIDI signals from the VG-99 are output.

MIDI

MIDI signals received at MIDI IN are out-
put.

RRC2

MIDI signals received through RRC2 are
output.

RRC2

This sets the routing of signals received via RRC.

OFF

Signals are not received through RRC2.

MAIN

Signals received at the RRC2 connector are
transmitted to the VG-99’s internal section.

RRC2

This sets the routing of signals output from the RRC2 connector.

OFF

Signals are not output from the USB connec-
tor.

MAIN

MIDI signals from the VG-99 are output.

USB

MIDI signals received via USB are output.

MIDI

MIDI signals received at MIDI IN are output
from the RRC2 connector (thru). When oth-
er signals also are set to be output simulta-
neously from the RRC2 connector, the
signals are mixed and then output together
(merge).

VG-99_e.book 170 ページ 2007年7月5日 木曜日 午前9時22分

Advertising