Rosewill RC212 User Manual
Page 11
SATA+ULTRA ATA RAID CONTROLLER
RC212 User Manual
11
1.
As the BIOS boots press Tab when prompted to enter the RAID BIOS.
2.
At the RAID utility main menu select Create Array, press Enter.
3.
At the next screen select Auto Setup (Safe, Performance), press Enter.
4.
When asked Auto Create array will destroy all data on disks. Continue? (Y/N), press Y
to accept.
5.
And then a Create New Raid Success!! Message will be displayed. Press ESC to quit
then go back to the RAID utility main menu.
6.
Press ESC to exit the BIOS.
7.
When asked Do you really want to exit the utility? (Y/N), press Y to accept.
Manual configuration
1.
As the BIOS boots press Tab when prompted to enter the RAID BIOS.
2.
At RAID utility main menu select Create Array, press Enter.
3.
At the next screen select Array Mode RAID 1 (Mirroring), press Enter.
4.
At the next screen select RAID 0/1, press Enter.
5.
At the next screen select Select Disk Drives, press Enter.
6.
Please use arrow keys ↑and ↓ to select the first drive, press Enter.
7.
Please use arrow keys ↑and ↓ to select the second drive, press Enter.
8.
Please use arrow keys ↑and ↓ to select the third drive, press Enter.
9.
Please use arrow keys ↑and ↓ to select the fourth drive, press Enter.
10.
Select Block Size 64, press Enter.
11.
Select chunk size from 4K, 8K, 16K, 32K or 64K, then press Enter.
12.
Select Start Create Process, press Enter.
13.
When asked The data on the selected disk will be destroied. Continue? (Y/N), press Y
to accept.