Rosewill RC212 User Manual
Page 23
SATA+ULTRA ATA RAID CONTROLLER
RC212 User Manual
23
＊
For An Existing Installation
1.
Setup the RAID Array prior to driver installation and boot up to Windows.
2.
At the Found New Hardware Wizard window pop-up, please click Cancel button
to cancel the driver installation for the device at this moment. The driver for this
device will be installed in the next step.
3.
Please insert the CD driver bound with PCI SATA+PATA RAID card into your
CD-ROM Drive.
4.
At the Windows desktop, click Start, then Run.
5.
Type D:\RC-212\Setup.exe, click OK. (Change D:\ to match your CD-ROM drive
letter)
6.
Follow the on-screen instructions to complete the installation, and then restart your
system.
7.
Once you have rebooted your computer. Windows® 98SE/Me will detect the PCI
SATA+PATA RAID card and find a VIA VT6421 RAID Controller device. When the
Add New Hardware Wizard asks What would you like to do?, select Specify the
location of driver (Advanced) and click Next button.
8.
When the Add New Hardware asks for the driver installation, uncheck all the boxes
to allow Windows® 98SE/Me search its own driver database. Click Next to start the
search.
9.
The Add New Hardware Wizard will find the driver for the device VIA VT6421 RAID
Controller. Click Next to continue.
10.
When the driver installation is complete, click Finish.
11.
Your computer must be restarted in order to complete the installation, click Yes to
restart your computer.