Roland SC-88 Pro - Manual (Page 116)

■ Selecting the CM-64 sound map
This unit can be set to the sound map of the Roland CM-64 (Multi-timbre Sound
Module). When you wish to play song data that was created for the CM-64, use the fol-
lowing procedure.
* Be aware that if you select the CM-64 sound map, all previous settings will be lost.
* If you wish to use the same sounds as the SC-55/55mk II , press [SC-55 MAP] button.
1.
While holding down [SELECT], press INSTRUMENT [ l l l l ].
The display will ask “ Init CM-64, Sure? ”.
2.
Press [ALL] and the CM-64 sound map will be selected.
To safely cancel the operation press [MUTE].
INSTRUMENT PART
LEVEL PAN
REVERB CHORUS
KEY SHIFT MIDI CH
SELECT
EFX ON/OFF
USER
INST
VIB RATE
ATTACK
VIB DEPTH
CUTOFF
DECAY
VIB DELAY
RESONANCE
RELEASE
DELAY
EFX VALUE EFX PARAM EFX TYPE
ALL
MUTE
SC-55
MAP
SC-88
MAP
1
2
1
Chapter 5. Convenient functions 114