Radio Shack 43-3577 - Manual (Page 20)

20
Memor
y Dialing
Memory Dialing from Talk Mode
1. Press TALK.
Talk
and the volume setting appears.
2. Press MEM.
3. Press RING/VOL +/– or (0–9) to select the memory location of the desired
phone number. The selected name is displayed.
4. Press SELECT to dial the number.
n
Notes: If you select a memory location that does not have a stored number,
the phone will not dial.
Chain Dialing
The memory locations on the handset are not limited to phone numbers. You
can also store a group of numbers (up to 20 digits) that you need to enter once
your call connects. This is referred to as Chain Dialing.
Store your special number with an identifying name. (Refer to “Storing an Entry”
on page 18.)
When you need to enter the numbers while on a call:
1. Press MEM.
2. Select the memory location where the number is stored.
3. Press SELECT to dial.
Editing an Entry
1. Press MEM,
Select Memory
displays.
2. Press RING/VOL +/– or (0–9) to select the memory location you want to
edit.
3. Press SELECT. The stored number displays.
4. Press SELECT again.
5. Select
Edit Memory X
.
6. Press SELECT. The stored name appears and the
cursor flashes. If a name has not been stored, the
cursor appears on the second line.
g
Edit Memory 1
Delete Memory 1
Go Back