RAD Data comm BLW-04EX - Manual (Page 28)

48
BLW-04EX
47
BLW-04EX
Configuration Tools
Choose a function and click.
Reset
Click “Apply” to reset the BLW-04EX. The reset will be complete when the
power LED stops blinking.
Note:
If you use the Reset button on the rear panel, the BLW-04EX performs a
power reset. If the button is held depressed for over 5 seconds, all the LEDs
will illuminate and the factory settings will be restored.
Allows a remote PC t o configure, m anage, and monit or the BLW- 0 4 E X
using a standard web browser. Check “Enable” and enter the IP address of
the remote host. Click “APPLY.”
Note:
If you speci fy an IP address of 0.0.0.0, any hos t can manage the BLW-
04EX.
Main Menu
Tools
Use th e “Tools ” menu t o back up t he current co nfigu rat io n, rest ore a
previously saved configuration, restore factory sett ings, update firmware,
and reset the BLW-04EX.
4 4 MISC Setting