RAD Data comm BLW-04EX User Manual
Page 41
74
BLW-04EX
73
BLW-04EX
2 . In the “Comm an d Promp t” window, typ e “IPC ONFIG /R ELEASE”
and press the <ENTER> key.
3. Type “IPCONFIG /R ENEW” and press the <ENTER> key. Verify that
your IP address is now 192.168. 1.xxx (2-254), your Subnet Mask is
255.255.255.0 and your Defaul t Gateway is 192.168.1.1. These values
confirm that your BLW-04EX is functioning.
4. Type “EXIT” and press <ENTER>.
Internet.” Click “OK.”
Step 3. Obtain IP Settings From Your BLW-04EX
Now t hat you have configured your computer t o connect to your BLW-
04EX, it needs to obtain new network settings. By releasing old IP settings
and renewing them with settings from your BLW-04EX, you will also verify
that you have configured your computer correctly.
1. From the Wind ows d es kt op, cl ick “Start / Program s/ Access ories /
Command Prompt.”