Rosewill RC-303 - Manual (Page 4)

2-Serial/1-Parallel Port PCI Adapter RC303 User Manual
Windows 98/95/2000 will automatically restart in order to update the hardware configuration.
Once Windows 98/95/2000 has restarted, you can now connect your external devices to the PCI I/O card. To install
the driver for the external devices, please refer to the external device user’s manual.
Windows NT 4.0
z Make sure Windows NT 4.0 is properly installed into your system first.
z Start Windows NT.
z Insert Windows NT 4.0 driver diskette (disk 2) into the floppy drive.
z Select “RUN” option in Windows NT.
z At the “RUN” option, click on the“Browse” button.
z At the Browse for Folder window:
z Select “Floppy (A)”
z Double click on the winnt folder
z Select NetMosXXX drivers.exe
z Click on the Open button
z Finally, click the“OK” button
z Follow the instructions to finish up the driver installation. Your system will automatically restart in
order to complete the driver installation.
z Installing DOS Driver
z Copy “NMDOSIN.EXE” to your hard disk and run “NMDOSIN.EXE”
z Update Drivers
z Please visit this website: http:/www.rosewill.com/for all the latest drivers for your PCI I/O card.
Thank you for purchasing a quality Rosewill Product.
Please register your product at : www.rosewill.com/ for complete warranty information and future support for your
product.
3