Ricoh AP505 - Manual (Page 27)

Installing the Memory Unit Type505 (DIMM)
9
2
Installing the Memory Unit Type505 (DIMM)
R CAUTION:
Important
❒ The memory unit can be damaged
by small amounts of static electric-
ity. Before touching it, touch some-
thing metal to discharge static
electricity from you.
A
Turn off the printer's power
switch and remove all cables and
cords from the printer.
B
Remove screws and remove the
back plate.
Note
❒ A coin can be used to remove
the screws.
C
Open the white tabs, which hold
the memory, to their widest posi-
tion (
A). Insert the memory unit
horizontally into the slot (
B).
Push it in and then close the
white tabs (
C).
Note
❒ There are two notches on the
side with the connector of the
memory unit. They are located
on the left and in the center. Be
sure to align the notches over
the guides correctly, as shown
in the illustration.
D
Attach the back plate to its origi-
nal position, and fasten it with
screws that were removed in step
B.
Note
❒ A coin can be used to fasten the
screws.
• Make sure to turn off the printer
and wait for about 30 minutes
before installing options. Not
waiting for the printer to cool
down can result in a burn.
TFWX185E
TFWX190E
TFWX195E