Ricoh AP505 - Manual (Page 59)

Removing Misfed Paper
41
4
B
Open the front cover by pushing
the front cover release button.
C
Turn the dial downward, then re-
move the misfed paper in the
printer.
Note
❒ When removing misfed paper,
be careful not to touch the fus-
ing section because it could be
very hot.
When you can see the misfed
paper inside the printer.
Note
❒ If it is difficult to turn the dial,
turn it slightly upward in the
opposite direction, and then try
again.
A Remove the misfed paper from
inside of the printer.
While turning the dial, remove
the misfed paper as shown in
the illustration. Be careful not to
leave any misfed paper in the
printer.
Note
❒ When removing misfed pa-
per, be careful not to touch
the fusing section because it
could be very hot.
When you cannot see the misfed
paper inside the printer.
A Remove the misfed paper from
the output tray.
While turning the dial, remove
the misfed paper as shown in
the illustration. Be careful not to
leave any misfed paper in the
printer.
Note
❒ When removing misfed pa-
per, be careful not to touch
the fusing section because it
could be very hot.
D
Close the paper exit cover.
E
Close the front cover.
TFWX080E
TFWX220E
TEWX240E