Radio Shack 43-3857 - Manual (Page 15)

Memory Diali
n
g
15
• Use PAUSE/REDIAL to enter a pause in the
dialing sequence. The display shows a P .
Ô
Each pause counts as one digit and
represents a two second delay of time
between the digits as they are sent.
• Use CH/DELETE to delete digits as needed.
8. Press MEM or REMOTE/SELECT . You will hear a
confirmation tone. Memory storage is
complete. For example, if you store a name and
number into memory location number 01, the
display shows
Memory01 Stored .
After about two seconds, the Select Memory
screen is displayed.
Repeat steps 2 - 8 to store more numbers.
9. Press END to return to standby mode.
S
TEPS FOR
E
NTERING
N
AMES AND
S
PECIAL
C
HARACTERS
Refer to the letters on the number keys to select the
desired characters.
With each press of a numeric key, the displayed
character appears in the following order:
Upper case letters first, lower case letters next, and
finally the number corresponding to the key.
Ô
NOTE
Ô
The pause feature is useful
for long distance calling,
credit card dialing, or
sequences that require a
pause between digits.
43-3857.book Page 15 Wednesday, February 18, 2004 12:40 PM