Radio Shack 43-3857 - Manual (Page 17)

Memory Diali
n
g
17
2. Press VOL or VOL , or enter a number (0-
9) to select the memory location you would like
to dial.
Ô
3. Press TALK/FLASH . Talk and the volume
setting appear on the display. Then the
displayed number is dialed.
Memory Dialing from Talk Mode
1. Press TALK/FLASH . Talk and the volume
setting appears.
2. Press MEM .
3. Press VOL or VOL , or enter a number (0-
9) to select the memory location of the desired
phone number. If you press
REMOTE/SELECT,
the number is dialed.
4. To hang up, press END .
C
HAIN
D
IALING
The memory locations on the handset are not
limited to phone numbers. You can also store a
group of numbers (up to 20 digits) that you need to
enter once your call connects. This is referred to as
Chain Dialing.
An example of this is a bank account number. Once
you have called your bank, and are prompted to
enter the account number, press
MEM and select
the location number where the special number has
been stored. Then press
REMOTE/SELECT .
Store your special number with an identifying name.
(See “Storing Phone Numbers and Names” on
page 13.)
E
DITING A
S
TORED
N
AME AND
/
OR
P
HONE
N
UMBER
1. Press MEM.
Select Memory is displayed.
2. Press VOL or VOL , or enter a number (0-
9) to select the memory location you would like
to edit, and press
MEM or REMOTE/SELECT .
Ô
NOTES
Ô
• If you press REMOTE/
SELECT before TALK/
FLASH , you can confirm
the name and the
number stored in the
selected memory
location.
• To exit the memory
function without dialing,
press
END . The handset
returns to standby.
• Whenever you are using
a memory menu screen,
you must press a key
within 30 seconds or the
phone will return to
standby.
43-3857.book Page 17 Wednesday, February 18, 2004 12:40 PM