Radio Shack 43-3857 - Manual (Page 24)

C
a
ller ID
24
2. Press TALK/FLASH . The displayed phone
number dials automatically.
You can also place a call from Talk Mode.
1. Press TALK/FLASH . Then press CID/MENU .
2. Select the phone number that you want to dial
by pressing the VOL or VOL .
3. Press REMOTE/SELECT. The displayed phone
number will be dialed.
Long Distance Calls and Area Code
Setting/Cancellation
Pressing 1 while the incoming Caller ID information
is displayed will place or remove the prefix 1 in the
display to set up for a long distance call or cancel.
Pressing
3 will set or cancel an area code setting. Ô
Storing Caller ID Messages in Memory
Dialing
Messages shown in the Caller ID list can be stored
in memory dialing.
Using the incoming call information (i.e., Caller ID
list), the phone number of the party on the Caller ID
list can be stored in memory.
1. Press CID/MENU .
Select the phone number to be stored from the
Caller ID list by pressing
VOL or VOL .
2. Press MEM .
3. Press VOL and VOL or enter a number ( 0 -
9 ) to select the memory location to be stored.
4. Press REMOTE/SELECT . Ô
You hear a confirmation tone and the number is
stored in memory.
The display returns to the Caller ID list.
Ô
NOTES
Ô
Long Distance Calls and
Area Code Setting/
Cancellation
When a long distance call
has been set,
1 appears in
the display.
Storing Caller ID
Messages in Memory
Dialing
• You can not store a
Caller ID message if no
phone number appears
in the message.
• If a message has
already been stored in
the selected memory
number location, a
confirmation screen is
displayed. Press
VOL
to select Yes . Press
REMOTE/SELECT to
overwrite. The display
returns to the Caller ID
list.
43-3857.book Page 24 Wednesday, February 18, 2004 12:40 PM