Scan driver, Setting up the printer, For a network-connected – Ricoh Laser MFP Printer User Manual
Page 123: For a usb-connected, For a network-connected for a usb-connected
Using Your Printer with a Macintosh
31
Scan driver
Installing the Scan driver
1
Make sure that you connect your printer to the computer.
Turn on your computer and printer.
2
Insert the CD-ROM which came with your printer into the
CD-ROM drive.
3
Double-click CD-ROM icon that appears on your
Macintosh desktop.
4
Double-click the MAC_Installer folder.
5
Double-click the MAC_Twain folder.
6
Double-click the ScanThru Installer icon.
7
Enter the password and click OK.
8
Click Continue.
9
Click Install.
10
Click Continue.
11
After the installation is finished, click Quit.
Uninstalling the Scan driver
1
Insert the CD-ROM which came with your printer into the
CD-ROM drive.
2
Double-click CD-ROM icon that appears on your
Macintosh desktop.
3
Double-click the MAC_Installer folder.
4
Double-click the MAC_Twain folder.
5
Double-click the ScanThru Installer icon.
6
Enter the password and click OK.
7
Click Continue.
8
Select Uninstall from the Installation Type and then Click
Uninstall.
9
Click Continue.
10
When the uninstallation is done, click Quit.
Setting Up the Printer
Set up for your printer will be different depending on which
cable you use to connect the printer to your computer—the
network cable or the USB cable.
For a Network-connected
1
Follow the instructions on “Installing Software for
Macintosh” on page 30 to install the PPD file on your
computer.
2
Open Print Center or Printer Setup Utility from the
Utilities folder.
3
Click Add on the Printer List.
4
Select the AppleTalk tab.
The name of your machine appears on the list. Select
MFP000xxxxxxxxx from the printer box, where the
xxxxxxxxx varies depending on your machine.
5
Click Add.
6
If Auto Select does not work properly, select Printer
Model and your printer name in Model Name.
Your machine appears on the Printer List and is set as the
default printer.
For a USB-connected
1
Follow the instructions on “Installing Software for
Macintosh” on page 30 to install the PPD file on your
computer.
2
Open Print Center or Printer Setup Utility from the
Utilities folder.
3
Click Add on the Printer List.
4
Select the USB tab.
5
Select your printer name and click Add.
6
If Auto Select does not work properly, select Printer
Model and your printer name in Model Name.
Your machine appears on the Printer List and is set as the
default printer.