Ricoh Laser MFP Printer - Manual (Page 76)

14.9
<Troubleshooting>
Retry Redial? The machine is
waiting for a
specified time
interval to redial a
previously busy
station. You can press OK to
immediately redial, or
Stop/Clear to cancel the
redial operation.
Scanner locked The scanner module
is locked Unlock the scanner and
press Stop/Clear.
Self Diagnostic
LSU The LSU (Laser
Scanning Unit) in
your printer is
checking some
problems detected. Please wait a few
minutes.
Self Diagnostic
Temperature The engine in your
machine is checking
some problems
detected. Please wait a few
minutes.
Send Error
(AUTH) There is a problem
in SMTP
authentication. Configure the
authentication setting.
Send Error
(DNS) There is a problem
in DNS. Configure the DNS
setting.
Send Error
(POP3) There is a problem
in POP3. Configure the POP3
setting.
Send Error
(SMTP) There is a problem
in SMTP. Change to the available
server.
Send Error
(Wrong Config) There is a problem
on the network
interface card. Configure your network
interface card correctly.
[Stop Pressed] Stop/Clear has
been pressed during
a fax transmission. Try again.
Tray 1
Paper Empty There is no paper in
the tray 1. Load paper in the tray 1.
See page 5.5.
Tray 2
Paper Empty There is no paper in
the optional tray 2. Load paper in the
optional tray 2. See page
5.5.
Message Meaning Suggested solutions