Ricoh Laser MFP Printer - Manual (Page 13)

1.3
<Introduction>
Control panel overview
1 Speed buttons: Allows you to store frequently-dialed fax numbers
and email addresses and enter them with the touch of a few
buttons. 13 Back: Sends you back to the upper menu level.
2 Shift: Allows you to shift the speed buttons to access numbers 16
through 30. 14 Status: Shows the status of your machine. See page 1.4.
3 Address Book: Allows you to store frequently used fax numbers in
memory or search for stored fax numbers or email addresses. Also
allows you to print an Address Book/Phone Book list. 15 Darkness: Adjusts the document brightness for the current copy
job.
4 Resolution: Adjusts the document resolution for the current fax job. 16 Original Type: Selects the document type for the current copy job.
5 Redial/Pause: In Standby mode, redials the last number, or in Edit
mode, inserts a pause into a fax number. 17 Reduce/Enlarge: Makes a copy smaller or larger than the original.
6 Fax: Activates Fax mode. 18 USB Print: Allows you to directly print files stored on a USB
Memory device when it is inserted into the USB memory port on
the front of your machine.
7 Copy: Activates Copy mode. 19 Duplex: Allows you to print documents on both sides of the paper.
8 Scan/Email: Activates Scan mode. 20 Toner Save: Allows you to save on toner by using less toner in
printing.
9 Display: Shows the current status and prompts during an operation. 21 Number keypad: dials a number or enters alphanumeric characters.
10 Menu: Enters Menu mode and scrolls through the available menus. 22 On Hook Dial: Engages the telephone line.
11 Scroll buttons: Scroll through the options available in the selected
menu, and increase or decrease values. 23 Stop/Clear: Stops an operation at any time. In Standby mode,
clears/cancels the copy options, such as the darkness, the
document type setting, the copy size, and the number of copies.
12 OK: Confirms the selection on the screen. 24 Start: Starts a job.