Tad operation, Selecting the outgoing message, Recording/deleting an outgoing message – Radio Shack 900MHz User Manual

Page 22: Setting the record time

Advertising
background image

22

TAD Operation

ˆ

TAD Operation

SELECTING THE
OUTGOING MESSAGE

The phone has two prerecorded outgo-
ing messages. One asks the caller to
leave a message: “Hello, no one is avail-
able to take your call. Please leave a
message after the tone.” The phone
uses this message when

REC TIME

is

set to

1

or

4

(see “Setting the Record

Time”).

The other is simply an announcement
and does not let the caller leave a mes-
sage: “Hello, no one is available to take
your call.” The phone uses this message
when

REC TIME

is set to

ANN

(an-

nouncement only).

You can also record your own message
(see “Recording/Deleting an Outgoing
Message”). When you record your own
outgoing message, the phone uses it for
all

REC TIME

settings.

To switch between your outgoing mes-
sage and the phone’s prerecorded mes-
sage, repeatedly press

MSG LINE

SELECT

until the line indicator for the

desired line lights in the message
counter window, then press

OGM

. When

the current message begins to play,
press

OGM

again. The phone switches

to the other message and plays it. The
display shows

P

for prerecorded mes-

sage or

U

for your own message.

RECORDING/DELETING
AN OUTGOING MESSAGE

You can record different messages for
each line. Press

MSG LINE SELECT

so

the line indicator for the desired line
lights in the message counter window.
Hold down

OGM

until the phone beeps

and the message counter window starts
counting. Then speak your outgoing
message (up to 30 seconds long) into
the built-in microphone on the bottom of
the base. You can see how long your
message is by watching the message
counter window.

When you finish your message, press

PLAY/STOP

or

OGM

. The phone plays

back your message.

To delete your outgoing message and
use the phone’s prerecorded messages,
hold down

OGM

until the phone beeps.

Then press

OGM

again within two sec-

onds.

SETTING THE RECORD
TIME

Set

REC TIME

to

1

,

4

, or

ANN

to deter-

mine how the phone will record incom-
ing messages for each line.

1

— The phone plays the outgoing mes-

sage and lets callers leave a message
up to 1 minute long.

4

— The phone plays the outgoing mes-

sage and lets callers leave a message
up to 4 minutes long.

Advertising