Radio Shack 900MHz - Manual (Page 24)

24 TAD Operation
RECORDING A MEMO
A memo is a message you can record at
the phone for yourself or others in your
home or office. The phone stores mem-
os as incoming messages on the select-
ed line (see “Playing Messages”).
To record a memo, press MSG LINE SE-
LECT so the line indicator for the desired
line lights in the message counter win-
dow. Hold down
MEMO on the base until
the phone beeps and starts counting in
the message counter window, then
speak your message. When you finish
the memo, press
PLAY/STOP or MEMO .
Notes:
• The maximum length for recording a
memo is 10 minutes.
• The phone cannot record a memo
less than two seconds long.
• If you receive an incoming call or
page from the handset, the phone
exits the memo recording mode.
• You cannot record a memo while
the phone is answering the other
line.
RECORDING A
CONVERSATION
The phone lets you record both sides of
a telephone conversation.
Important Note: It is illegal in some ar-
eas to record a conversation without the
consent of all parties to the conversa-
tion, including the phone company.
Check the laws in your area before you
use the two-way recording feature.
To start recording a phone conversation,
repeatedly press
MSG LINE SELECT until
the line indicator for the line you are talk-
ing on lights in the message counter
window. Then press
MEMO on the base.
The phone beeps and the message
counter window starts counting. To stop
recording, press
PLAY/STOP or MEMO .
The phone stores a recorded conversa-
tion as a message on the selected line
(see “Playing Messages”).
Notes:
• The maximum length for recording a
conversation is 10 minutes.
• The phone cannot record a conver-
sation less than two seconds long.
• When you want to record a confer-
ence call using both LINE 1 and
LINE 2, you can select either line
with
MSG LINE SELECT .
• You cannot record a conversation
when the telephone is answering on
the other line.
PLAYING MESSAGES
After the phone has recorded a mes-
sage, its message counter shows the to-
tal number of messages stored. If you
have new messages, the number flash-
es.
To play your messages, repeatedly
press
MSG LINE SELECT until the line in-
dicator for the desired line lights in the
message counter window, then press
PLAY/STOP . The phone announces the
number of new and old messages, then
plays the new messages. The message