Regency Liberty L900-1 - Manual (Page 36)

Regency ® L900-1 Direct Vent Gas Fireplace 36
INST
ALLA
TION
MESH PULL SCREEN INSTALLATION
1) Hang the right side mesh screen on the right side rod by placing the
rings on the mesh screen thru the rod. Repeat for left side.
Outer Most Bracket Hole
Right Side Rod
Left Side Rod
2) Place the straight end of the right side rod thru the outer most bracket
hole located on the middle inside top of the outer shell.
3) Place the curved end of the right side rod thru the bracket located
on the top right of the glass frame.
4) Place the straight end of the left side rod thru the inner most bracket
hole located on the middle inside top of the outer shell.
Place the curved end of the left side rod thru the bracket located on
the top left of the glass frame.
Inner Most Bracket Hole
Completed Mesh Pull Screen Installation
5) Spread the mesh evenly along the rod's to cover the glass door.
Ensure the mesh goes around the curved end of the rod's as well.
Inside top view of Firebox
INSTALLATION