Roland XP-30 User Manual
Page 70
70
Chapter 3. Creating Your Own Sounds
KEY RANG (Key Range)
These parameters specify the range of notes that will play the
Tone. This can be used to make notes in different areas of the
keyboard play different Tones.
Lower (Key Range Lower)
Specify the lowest note that will play the Tone.
Upper (Key Range Upper)
Specify the highest note that will play the Tone.
* It is not possible to set Lower to a value greater than Upper, nor
Upper to a value less than Lower. If you attempt to do so, the
two values will change together.
* If you have used Octave Shift (System) or the Transpose
parameter (SYSTEM/CONTROL/KEYBOARD) to transpose
the pitch of the XP-30’s keyboard, the keyboard area specified by
Key Range will also be shifted.
STRUCT (Structure)
Type (Structure Type)
The Structure parameter determines how Tones 1 and 2 (and
3 and 4) are connected.
fig.3-25a
fig.3-25b
fig.3-25c
fig.3-25d
fig.3-25e
fig.3-25f
fig.3-25g
fig.3-25h
fig.3-25i
fig.3-25j
TONE 1 (3)
TONE 2 (4)
TVA
TVF
WG
WG
TVF
TVA
TYPE 1
TONE 1 (3)
TONE 2 (4)
TVA
TVF
WG
WG
TVF
TVA
TYPE 2
TONE 1 (3)
TONE 2 (4)
TVA
TVF
WG
WG
TVF
TVA
B
TYPE 3
TONE 1 (3)
TONE 2 (4)
TVA
TVF
WG
WG
TVF
TVA
B
TYPE 4
TONE 1 (3)
TONE 2 (4)
TVA
TVF
WG
WG
TVF
TVA
R
TYPE 5
TONE 1 (3)
TONE 2 (4)
TVA
TVF
WG
WG
TVF
TVA
R
TYPE 6
TONE 1 (3)
TONE 2 (4)
TVA
TVF
WG
WG
TVF
TVA
R
TYPE 7
TONE 1 (3)
TONE 2 (4)
TVA
TVF
WG
WG
TVF
TVA
R
TYPE 8
TONE 1 (3)
TONE 2 (4)
TVA
TVF
WG
WG
TVF
TVA
R
TYPE 9
TONE 1 (3)
TONE 2 (4)
TVA
TVF
WG
WG
TVF
TVA
R
TYPE 10