Picture, Audio, Specifications – ROTEL DVD Audio/Video Player RDV-1093 User Manual

Page 30: General, Other, Video output, Audio output, Audio characteristics, Rdv-1093 dvd audio/video player picture

Advertising
background image

30

RDV-1093 DVD Audio/Video Player

Picture

Picture is noisy.

• The player is connected to a VCR directly

and the copy guard function is activated.
Connect the player directly to the TV.

Cannot get correct picture on TV.

• Connect the RDV-1093 to the TV with the

correct kind of cable.

• Make sure that the Video Output setting

matches the correct resolution of your TV.
You cannot display progressive scan video
on standard definition TVs.

• Make sure that the PAL/NTSC setting

matches your TV.

Picture does not fill screen.

• Set ASPECT RATIO correctly.

HDMI LED flashing continuously and

no picture.

• HDMI components must be Ver. 1.1 compat-

ible.

• HDMI cables must be 5 meters or less in

length.

No picture at Component video.

• Most DVD Video discs are Macrovision,

HDCP compliant. Set the Output format of
High Definition setup change to Progressive
(480p/576p) or interlace (480i/576i).

Audio

No sound.

• Check the audio cable connection and input

settings on preamplifier.

Garbled sound.

• Clean the disc surface.

Specifications

General

Readable discs:

DVD-Audio, DVD-Video, Audio CD, MP3 in CD-R/

RW, DVD-/+R
Video format:

PAL or NTSC. 480i/576i, 480p/576p, 720p,

1080i, 1080p.

Other

Power requirements:

AC 110-240 V, 50/60 Hz
Power consumption:

26 W
Weight:

5.1 kg (11.2 lbs)
Dimensions (W x H x D):

432 mm x 92 mm x 336 mm

17.01” x 3.62” x 13.23”
Front Panel Height

(feet removed/for rack mount)

80 mm/3.15”

Video output

COMPONENT (pin jack):

Y Output: 1.0 Vp-p (75 ohm)

PB/PR Output: 0.7 Vp-p (75 ohm)
COMPOSITE (pin jack):

1.0 Vp-p (75 ohm)
S-VIDEO OUT (S jack):

Y Output: 1.0 Vp-p (75 ohm)

C Output (NTSC): 286 mVp-p (75 ohm)

C Output (PAL): 300 mVp-p (75 ohm)
HDMI:

Version 1.1
Signal to noise ratio:

65 dB

Audio output

Analog Out (pin jack):

2.0 Vrms (220 ohms)
Digital Out:

Optical: –21dBm to –15dBm (Peak)

Coaxial: 0.5 Vp-p (75 ohm)

Audio characteristics

Frequency response:
CD (at 44.1 kHz): 2 Hz to 20 kHz

DVD (at 48 kHz): 2 Hz to 22 kHz

DVD (at 96/88.2 kHz): 2 Hz to 44 kHz

DVD (at 192/176.4 kHz) : 2 Hz to 88 kHz
Dynamic range:

16 bit: more than 100 dB

20 bit: more than 110 dB

24 bit: more than 110 dB
Wow and flutter:

Unmeasurable (less than ± 0.002%)
Total harmonic distortion:

16 bit: less than 0.0018%

20/24 bit: less than 0.0012%

All specifications are accurate at the time of print-
ing.

Rotel reserves the right to make improvements
without notice.

Rotel and the Rotel HiFi logo are registered trade-
marks of The Rotel Co, Ltd., Tokyo, Japan.

Advertising