Ricoh CL3000DN - Manual (Page 42)

Replacing Consumables and Maintenance Kit
38
3
Fusing Unit Type 125
R CAUTION:
Replace the fusing unit when the fol-
lowing message appears on the panel
display.
or
Check the contents of the box for the
following items:
❖ ❖ ❖ ❖ Fusing Unit
❖ ❖ ❖ ❖ Transfer Roller
Important
❒ Be sure to make the setting from
the control panel after replacing
the fusing unit. Without it, the pro-
cedure is incomplete.
AAAA
Turn off the power.
Important
❒ To prevent a burn, after the
power is turned off, be sure to
wait about 30 minutes until the
fusing unit cools down before
touching the fusing unit.
• The inside of the machine be-
comes very hot. Do not touch the
parts with a "
v" label (means
hot surface). Touching a part
with a "
v" label (means hot sur-
face) could result in a burn.
• The fusing unit becomes very
hot. When installing the new fus-
ing unit, turn off the printer and
wait about 30 minutes. After that,
install the new fusing unit. Not
waiting for the unit to cool down
can result in a burn.
• Do not pull out the fusing unit
forcefully. It may cause the unit
to fall and result in an injury.
• When touching the fusing unit,
do not touch any areas other
than the handle as it may cause
a burn.
Replace Fusing
Unit Soon
Replace
Fusing Unit
ZHBH200E
ZHBH590E
AresPGBMaintGuide-F_FM.book Page 38 Friday, July 26, 2002 5:17 PM