Ricoh CL3000DN - Manual (Page 65)

Error & Status Messages on the Control Panel
61
5
RPCS Graphic Error There is not enough graphics
memory to print the data. Specify the correct memory
capacity in the [Change Acces-
sories…]
option in the RPCS
printer driver's print settings
tab. For more information, see
the printer driver's Help.
To print the image correctly,
add memory to the printer, or
reduce the resolution of the
image.
RPCS Memory Overflow A memory overflow occurred
during the print job. After part
of the data for the page was
printed, the print job was sus-
pended. Specify the correct memory
capacity in the [Change Acces-
sories…]
option in the RPCS
printer driver's print settings
tab. For more information, see
the printer driver's Help.
To print the image correctly,
add memory to the printer, or
reduce the resolution of the
image.
RPCS Syntax Error Bidirectional transmission
may not be working properly
or the RPCS printer driver set-
tings may not be correct. Confirm that the option set-
tings for the printer driver
match the options actually in-
stalled on the printer.
There may not be enough
memory or the memory set-
tings for the printer driver
may not match the memory
actually installed on the print-
er. Specify the correct memory
capacity in the [Change Acces-
sories…]
option in the RPCS
printer driver's print settings
tab. For more information, see
the printer driver's Help.
To print the image correctly,
add memory to the printer, or
reduce the resolution of the
image.
This message may appear
when the computer is con-
nected to the printer with par-
allel interface. Set the parallel interface mode
of the computer to a mode
other than ECP.
Messages/Second messages Description Solution
AresPGBMaintGuide-F_FM.book Page 61 Friday, July 26, 2002 5:17 PM