RuggedCom M2100 - Manual (Page 22)

3. Technical Specifications
RuggedCom® RuggedSwitch® 22 M2100 Installation Guide Rev 1.0
3.5.2. Gigabit Ethernet (1000 Mbps) Modules
For maximum flexibility RuggedCom Inc. offers a number of different transceiver choices for Gigabit
fiber optic communications. The following table details fiber optic specifications based on the 2-port
modules or pluggable transceivers selected at time of ordering.
Optics
Order
Code
Mode /
Connector
Tx λ (nm)
Cable
Type
a
(µm)
Tx Pwr
(dBm)
b
(Min/Max)
Rx
Sensitivity
(dBm)
bb
Rx
Saturation
(dBm)
bb
Typical
Distance
(km)
c
Power
Budget
(dB)
12-11-0036 MM / LC 850 50/125 -9.5 / -4 -20 0 0.5 13
12-11-0027 SM / LC 1310 9/125 -9.5 / -3 -22 -3 10 18.5
12-11-0028 SM / LC 1310 9/125 -5 / 0 -22 -3 25 19.5
a
All cabling is duplex type unless otherwise specified.
b
All optical power numbers are listed as dBm averages.
c
Maximum segment length is greatly dependent on factors such as fiber quality, and number of patches and splices. Please
consult Ruggedom sales associates when determining maximum segment distances.
Table 3.6. Gigabit Ethernet (1000 Mbps) Modules
These transceivers utilize a distributed feedback (DFB) type laser and are rated for -20 °C
to +85 °C (-4 °F to +185 °F) operation only.
3.6. Operating Environment
Parameter Range Comments
Ambient Operating Temperature
-40 to 85 °C
-40 °F to +185 °F)
Ambient Temperature as measured from a 30cm
radius surrounding the center of the enclosure.
Ambient Relative Humidity 5% to 95% Non-condensing
Ambient Storage Temperature
-40 to 85 °C
(-40 °F to +185 °F)
Table 3.7. Operating Environment
3.7. Mechanical Specifications
Parameter Value Comments
Dimensions
482.6 X 368.3 X 51.3 mm
(19 X 15.5 X 2.02 in)
(Length X Width X Height)
with mounting brackets installed
Weight 5 kg (11.2 lb) with mounting brackets installed
Enclosure 18 AWG galvanized steel
Table 3.8. M2100 Mechanical Specifications