Rosewill WIRED INTERNET CAMERA RXS-3211 - Manual (Page 39)

Wired Internet Camera RXS-3211 User Manual
38
3.4.2 FTP Configuration
Item Description
FTP Server Input the IP address or host name of the FTP server you
wish to use here.
FTP Port Input the port number of the FTP server you wish to use
here.
User Name Input the user name of the FTP server you wish to use here.
Password Input the password of the FTP server you wish to use here.
Remote
Folder
Input the remote folder name on the FTP server here. If
nothing is specified here, all uploaded image files will be
placed in FTP server’s root directory.
Note: Please ask FTP server’s administrator to know
which folder you should use. Certain user name may
have restrictions and therefore can not place the file in
the directory not owned by the user.
Passive Mode Select “Enable” to use passive mode to send file, or select
“Disable” to not to use passive mode to send file. Some FTP
servers require passive mode, if you don’t know, please ask
FTP server’s administrator; most of FTP servers will work
fine with both modes, but if you found that non-passive mode
is not working, you can try to use passive mode.
Click “Apply” to save settings and make the new settings take effect.
After setup that, you can click “‘Upload a test file”’ to send a file to the FTP
server you set here, so you can make sure the setting you specified here is
correct and working.