Rosewill WIRED INTERNET CAMERA RXS-3211 - Manual (Page 40)

Wired Internet Camera RXS-3211 User Manual
39
3.5 Motion Detection Settings
There are two sections of the Motion Detection: Basic Setting and Region
Setting.
3.5.1 Motion Detection Basic Setting
Motion detection function makes this IP camera become your non-stop guard.
You don’t have to waste all the time monitoring the images from the camera,
and camera will detect all motions for you. Once motion is detected, a captured
snapshot file will be sent to you by Email or via FTP.
Item Description
Motion Detection
Enable
Select “Enable” to start motion detection, and select
“Disable” to disabled it.
Next Event Detected
Interval
Specify the time interval between two motion
detections in seconds. If a motion is detected after
last detection time, and before next detection time,
nothing will be send by Email or via FTP.
Please specify a time interval that suites your need. If
the time interval is too long, you may not be able to
know what is happened between time intervals; if the
time interval is too short, you may receive too much
unnecessary images, and consumes too much disk
storage spaces on Email and / or FTP server.
Send snapshot file to
Email
Select “Yes” to send a picture to the Email address
you specified in “E-Mail & FTP” menu when a motion
is detection, and select “No” to disable this function.