Rosewill WIRED INTERNET CAMERA RXS-3211 - Manual (Page 46)

Wired Internet Camera RXS-3211 User Manual
45
time setting.
Click “Apply” to save settings and make the new settings take effect.
3.7.3 Utilities
This menu allows you to upgrade firmware, clear all settings, reboot the
camera, and switch LED lights on/off.
Item Description
Upgrade
Firmware
If you downloaded latest firmware file from our
website, you can click “Browse” button to pick the
firmware file you wish to use. Then click “Upgrade”
button to start firmware upgrade procedure.
It’s recommended to use wired Ethernet connection
when you use this function, and DO NOT
DISCONNECT OR CLOSE WEB BROWSER
DURING UPGRADE!
Reset Clear all settings in the camera. Please think again
before you do this, and then click this button to reset
all settings.
NOTE: IP address will be reset to default value
“192.168.2.3” also. You’ll need to change the IP
address setting of your computer if the camera is
connects directly to it, or you’ll not be able to
connect to this IP camera again.
Reboot Device If you found the IP camera is responding slowly or
behaves strange, you can click this button to try to
reboot the IP camera, this may help.
LED Setting Switch the LED light of this IP camera off, so “LAN”
and “WLAN” LED on the IP camera will stop working,