Ricoh Aficio LD122 - Manual (Page 109)

Registering the Transfer Request
97
4
Registering the Transfer Request
This section describes how to register
the Transfer Station and Receiving
Station used in the fax function's
Transfer Request.
Note
❒ Before you can use Transfer Re-
quest, you must program the Poll-
ing ID and set the Transfer Report.
S e e “P ro g ra m m i n g a P o l lin g
ID”and “Transfer Report”, Facsim-
ile Reference <Advanced Features>.
❖ ❖ ❖ ❖ Transfer Station
This is the machine that receives
the Transfer Request to forward in-
coming messages to another desti-
nation.
❖ ❖ ❖ ❖ Receiving Station
The facsimile or computer that re-
ceives messages from the Transfer
Station.
Limitation
❒ When messages are transferred by
fax, Transfer Stations must be ma-
chines of the same make as this,
and have the Transfer Station func-
tion.
❒ When messages are transferred by
e-mail, Transfer Stations must be
machines of the same make as this,
and have both the Transfer Station
and Internet Fax functions.
❒ You cannot use Transfer Request
without programming the fax
number or e-mail address of the
Requesting Party in the Address
Book (Quick Dial or Speed Dial) of
the Transfer Stations.
Note
❒ Polling ID's of the Requesting Par-
ty (this machine) and Transfer Sta-
tions must be identical.
❒ You can have up to 30 Receiving
Stations per Transfer Station. If
you specify a Transfer Station
Group, the Group counts as a sin-
gle receiver.
Registering a Transfer
Station/Receiving Station
AAAA
Press the
{{{{User Tools/Counter}}}} key.
BBBB
Press [System Settings].
CCCC
Press [Key Operator Tools], and then
press [
T T T TNext].
DDDD
Press [Address Book: Program/ Change
/ Delete Transfer Request]
.
EEEE
Press [New Program].
FFFF
Set the Transfer Request's infor-
mation.
RussianC3_AEgsg-F_FM.book Page 97 Monday, June 16, 2003 6:35 PM