Ricoh PPC-154 - Manual (Page 10)

PPC-153 User’s Manual x
Chapter 4 Hardware Installation and Upgrade ............28
4.1 Jumpers and Connectors.................................................. 28
4.2 Disassembling the Panel PC............................................ 29
Figure 4.1:Unscrew the screw of side cover................. 29
Figure 4.2:Unscrewing rear cover of the panel PC....... 29
Figure 4.3:Opening the rear cover ................................ 30
Figure 4.4:The PPC without the Rear Cover ................ 30
4.3 Installing the 2.5" Hard Disk Drive (HDD) .................... 31
Figure 4.5:Screw the HDD metal frame to the side of the
HDD31
Figure 4.6:Place the HDD frame so it fits with the studs.
31
Figure 4.7:Plug the EIDE cable into the HDD ............. 32
Figure 4.8:Screw the right side of the metal plate to fix it
32
Figure 4.9:Screw the left side of the metal plate to fix it..
32
4.4 Installing the Central Processing Unit (CPU) ................. 33
4.5 Installing the DDR SDRAM Memory Module ............... 35
Figure 4.10:Placing the memory module in the DIMM 35
Chapter 5 Jumper Settings &
Connectors 38
5.1 Jumpers and Connectors.................................................. 38
5.1.1 Setting jumpers ............................................................. 38
5.1.2 Jumpers and switches.................................................... 39
Table 5.1:Jumpers, switches and their functions .......... 39
5.1.3 Jumper Locations.......................................................... 39
Figure 5.1:Jumpers on the PPC-153 motherboard........ 39
5.1.4 Connectors .................................................................... 40
Table 5.2:Panel PC connectors ..................................... 40
5.1.5 Locating connectors...................................................... 41
Figure 5.2:Connectors on PPC-153 motherboard......... 41
5.2 CPU Installation .............................................................. 42
5.3 CMOS Clear for External RTC (JP3) ............................. 42
Table 5.4:CMOS clear (JP3)......................................... 42
5.4 COM-port interface (JP4, JP5)........................................ 43
5.4.1 COM2 RS-232/422/485 setting (JP4)........................... 43
Table 5.5:COM2 RS-232/422/485 setting (JP4)........... 43
Table 5.6:COM 1/2 Pin 9 setting (JP5)......................... 44
5.5 VGA interface ................................................................. 44
5.5.1 LCD panel power setting .............................................. 44
Table 5.7:LCD Panel Power Setting (JP2) ................... 44
Chapter 6 Driver Installation..........................................46