Ricoh PPC-154 - Manual (Page 25)

17 Chapter 2
2.6 Installing the Drivers
After installing your system software, you will be able to set up the Ether-
net, SVGA, audio, PCMCIA and touchscreen functions. All the drivers
except the CD-ROM drive driver are stored in a CD-ROM disc entitled
"Drivers and Utilities." The CD-ROM drive driver is stored in a floppy
disk. Both the CD-ROM and the floppy disk can be found in your acces-
sory box.
To set up the CD-ROM function, insert the floppy disk with the CD-ROM
drive driver into the floppy disk drive and type "install" after the follow-
ing prompt is displayed on screen:
A: > INSTALL
Press "Enter", and the installation process will be completed in a few sec-
onds.
The standard procedures for installing the VGA, Chipset Software
Audio, ICH4USB2.0, Ethernet , touchscreen and Card reader drivers are
described in Chapter 6.
The various drivers and utilities in the CD-ROM disc have their own text
files which help users install the drivers and understand their functions.
These files are a very useful supplement to the information in this man-
ual.
Note: The drivers and utilities used for the PPC-154
panel PCs are subject to change without notice. If
in doubt, check Advantech's website or contact
our application engineers for the latest informa-
tion regarding drivers and utlities.